Electronicsmedia

Arm Helium technology is a new M-Profile Vector Extension bringing enhanced compute capabilities to the Armv8.1-M architecture Delivering up to 15x performance uplift for machine learning and up to 5x uplift to signal processing tasks on the smallest of edge devices For next-generation Cortex-M processors, aimed at small, embedded devices, where local decision-making is required Arm, a semiconductor and software...

At MWC 2019, CommSolid (a Goodix company) will present an IoT reference design integrating its NB-IoT and Bluetooth SOCs. The manufacturer uses the R&S CMW290 IoT radio communication testers for RF and functional testing of both transmission methods. At Embedded World 2019 in Nuremberg, which takes place in parallel to MWC in Barcelona, Rohde & Schwarz will demonstrate the...

KP Performance Antennas has unveiled a brand new 900 MHz, 10dBi, ±45 slant dual-polarized omni antenna for use in outdoor fixed wireless applications. This new omni-directional antenna from KP operates in the 824-928 MHz frequency range and provides uniform, 360-degree coverage with minimal azimuth ripple and 10 dBi of gain. It supports any 900 MHz access point radio (AP), including the popular Cambium...

Australian-Israeli company Electriq~Global (www.Electriq.com) and Dutch company Eleqtec (www.eleqtec.com) have entered into an agreement to launch Electriq~Global's water-based fuel technology in the Netherlands. Together they plan to launch Electriq~Fuel's recycling plants, and introduce eMobility applications for trucks, barges and mobile generators. The progressive Dutch market is moving to adopt zero-emission mobility solutions and is looking for commercial and economical clean...

Renesas Electronics Corporation, a premier supplier of advanced semiconductor solutions, today extended its high integration Renesas Synergy S5 microcontroller (MCU) series with the introduction of the entry-level S5D3 MCU Group. The four new S5D3 MCUs join the mid-range S5D5 and high-end S5D9 MCU Groups with similar S5 Series features—integrated 120 MHz Arm Cortex-M4 core and advanced security—as well as general-purpose features...

MediaTek and Rohde & Schwarz are collaborating to perform over-the-air (OTA) tests of MediaTek’s 5G frontend modules and antenna arrays. The R&S TS8980R&D-M1 test system, which includes the new R&S ATS1800C CATR (compact antenna test range) chamber, will be used to fully characterize, verify and test the antenna performance of MediaTek’s 5G network solutions including its Helio M70 5G...

Rugged connector and component manufacturer Bulgin has launched a smart connector which allows easy pairing of devices and connectors, real-time connection status sensing and electronic device serialisation. Its rugged, miniature design is impervious to the harshest possible environmental conditions such as temperature extremes, exposure to dirt, water immersion and chemical spray. The intelligent connector enables the system designer to implement...

Mouser Electronics  will be an Exhibitor Sponsor of the 14th edition of the India Electronics and Semiconductor Association (IESA) Vision Summit, February 19 and 20 in Bengaluru. The IESA Vision Summit 2019, which focuses on India's semiconductor and electronic system design and manufacturing (ESDM) sectors, will cover the theme of “Intelligent Electronics Systems & Automation — Unleashing the $400bn Opportunity.”...

AAEON, an award winning developer of AI hardware and a leader in industrial embedded solutions, releases the RICO-3399, a powerful PICO-ITX single-board computer that is built for AI applications and high-resolution displays. It features the Rockchip RK3399 ARM hexa-core processor, 4K Ultra HD video at 60 fps via HDMI 2.0, and a wide array of I/O features. The RICO-3399 features the...

The use of additive manufacturing processes is increasing within industrial applications, as they bring some significant customer benefits compared to conventional processes. Additive manufacturing is based upon the layered structure of a component. The production time therefore depends on the volume to be applied to the component. The geometric shape of the individual layers has a minor influence. This...