Isolated DC-DC Converter – Vicor Modular Power Components

180

The DCM is an isolated, regulated DC-DC converter, operating from an unregulated, wide range input to generate an isolated output. With its high-frequency zero voltage switching (ZVS) topology, the DCM converter consistently delivers high efficiency across the input line range. Modular DCM converters and downstream DC-DC products support efficient power distribution, providing superior power system performance and connectivity from a variety of unregulated power sources to the point of load.

Go to MIL-COTS DCM DC-DC Converter Modules »

Leveraging the thermal and density benefits of Vicor’s chip packaging technology, the DCM ChiP module offers flexible thermal management options with very low top and bottom side thermal impedances. Thermally-adept ChiP based power components enable customers to achieve cost-effective power system solutions with previously unattainable system size, weight and efficiency attributes, quickly and predictably.  The DCM VIA module will additionally provide integrated EMI filtering, tight output voltage regulation, a secondary-referenced control interface, and flexible thermal management options while retaining the fundamental design benefits of the conventional brick architecture.

Input Voltages 9 – 50 VDC
9 – 75 VDC
16 – 50 VDC
18 – 36 VDC
36 – 75 VDC
43 – 154 VDC
120 – 420 VDC
160 – 420 VDC
200 – 420 VDC
Output Voltage
(SELV)
3.3, 5, 12, 13.8, 15, 24, 28, 36, 48V
Output Power 4623 ChiP: Up to 600 W
3623 ChiP: Up to 320 W
3714 VIA: Up to 600 W
3414 VIA: Up to 320 W
Efficiency Up to 93%
Dimensions 4623 ChiP
1.886 x 0.898 x 0.284 in
47.91 x 22.8 x 7.21 mm3623 ChiP
1.524 x 0.898 x 0.284 in
38.72 x 22.8 x 7.21 mm3714 VIA
3.75 x 1.40 x 0.37 in
95.3 x 35.6 x 9.4 mm

3414 VIA
3.38 x 1.40 x 0.37 in
85.9 x 35.6 x 9.4 mm

For More Information Visit: Vicor Power

LEAVE A REPLY